Recent content by Jason Earley

  1. J

    Polaris RMK 800 Electrical Problem

    The zero reading on the 20k setting is of the black and white wires leading into the coil. The 1.2 reading is of the same wires at the 200 setting. Thinking that’s pretty close to open. You mentioned it should be around .3 ohms? I’ll check the plug wires alone again. you are extremely helpful...
  2. J

    Polaris RMK 800 Electrical Problem

    So pictures above of readings. If I’m doing it right...they seem way off from your values
  3. J

    Polaris RMK 800 Electrical Problem

  4. J

    Polaris RMK 800 Electrical Problem

    thanks again Mike. I’ll report back
  5. J

    Polaris RMK 800 Electrical Problem

    Will do. The external coil numbers are for the coil directly connected to the plug wires? If not do you have those numbers too? Really appreciate the advice
  6. J

    Polaris RMK 800 Electrical Problem

    Hello everyone. I’ve got a 2003 Polaris RMK 800 that is not getting spark to either plug. New plugs, disconnected the black and white wire to isolate the ignition/kill switches, checked for bad wiring as well as I could. What’s next? New coil? Then stator? What am I missing. Thanks in advance
See more
Back
Top Bottom