Hello, I was driving my Polaris and suddenly the RPM dropped, I stopped open the side and saw that one spark plug was disconnected. I came back home at low speed and changed the spark plug, changed the spark plug cable but still low RPM, new spark plug does not seem to be working, so I changed the spark plug to try it on the other side and the spark plug works. I have made another test I took the cable of the first spark plug and it worked. Although I still have this issue of low RPM, do you have any advise on what to check to understand the cause of the issue and how I can fix that/ Thanks
Polaris Snowmobile Forum
Hay Days 2025
Polaris Star Power will be in Booth EB11 with a large selection of the newest 509 clothing and Gear.
Kemimoto Rear Fender Blank-Offs for Polaris RZR PRO XP / R (2020-2024)
KEEP THE CAB CLEAN
This PRO XP /R fender blank off is used as a filler for the open gap in each rear wheel well for airflow to clean debris and keep the rain, snow, dirt, mud, dust, slush, and water out of the vehicle.
HEAVY-DUTY MATERIAL
Its made of 5mm thick PE board, has excellent resistance to poison and low temperature, and has good chemical stability, the inner splash fender guard mud resistance to most alkaline corrosion, waterproof, excellent electrical properties.
EASY TO INSTALL
The installation of the inner Rear Wheel Well Block Offs is simple and fast. The installation can be completed in minutes
FLEXIBLE DRILLING
RRO XP / PRO XP 4 fender flare has 3 holes on each side, and there is an optional 4th hole on the passenger side, which can be drilled with a 5/16 inch drill if necessary.
Super easy and fast installation: This is installed on a Pro R.
[ATTACH type="full"...
This PRO XP /R fender blank off is used as a filler for the open gap in each rear wheel well for airflow to clean debris and keep the rain, snow, dirt, mud, dust, slush, and water out of the vehicle.
HEAVY-DUTY MATERIAL
Its made of 5mm thick PE board, has excellent resistance to poison and low temperature, and has good chemical stability, the inner splash fender guard mud resistance to most alkaline corrosion, waterproof, excellent electrical properties.
EASY TO INSTALL
The installation of the inner Rear Wheel Well Block Offs is simple and fast. The installation can be completed in minutes
FLEXIBLE DRILLING
RRO XP / PRO XP 4 fender flare has 3 holes on each side, and there is an optional 4th hole on the passenger side, which can be drilled with a 5/16 inch drill if necessary.
Super easy and fast installation: This is installed on a Pro R.
[ATTACH type="full"...
Kemimoto 1680D Door Bags & Center Bag for Polaris RZR PRO XP 2020-2024
Here are the door bags and center bag that we added to our machine. They look like a great product with waterproof materials and zippers.
#1 The first bag we installed was between the seat bag or center bag.
Very easy to install. Center the bag between the seats and fold flap and mark top holes with silver sharpie.
Drill holes with 5/16" drill bit.
Push in the pins that were provided.
As the bag is hanging, you can now unzip and mark out the inner holes. Lift up bag, drill, then fold down bag and push in that last two pins that have been provided.
[ATTACH type="full" alt="IMG_6016...
#1 The first bag we installed was between the seat bag or center bag.
Very easy to install. Center the bag between the seats and fold flap and mark top holes with silver sharpie.
Drill holes with 5/16" drill bit.
Push in the pins that were provided.
As the bag is hanging, you can now unzip and mark out the inner holes. Lift up bag, drill, then fold down bag and push in that last two pins that have been provided.
[ATTACH type="full" alt="IMG_6016...
Kemimoto RZR Roof Overhead Storage Bag
Here is the overhead bag that we installed in our RZR. Very simple instructions.
Before you start your install onto the machine, be sure to insert the Velcro divider and the support rods.
If you have a roof, you will need to loosen the roof to slip the straps through.
Great looking product and very functional.
[URL...
Before you start your install onto the machine, be sure to insert the Velcro divider and the support rods.
If you have a roof, you will need to loosen the roof to slip the straps through.
Great looking product and very functional.
[URL...
RIP (Bigfuse)
Here is a picture of Ed Mosiewich (Bigfuse) at Moto X doing what he loved.
Very Sad new that Ed Mosiewich ( BigFuse) has passed. Snowmobiling was his life's passion. He was Polaris all the way.
He loved snowmobiling and photography. It was was everything to Ed.
He was a funny, witty, sarcastic guy with a huge heart. He will be missed by many.
Please put him in your thoughts and prayers.
Very Sad new that Ed Mosiewich ( BigFuse) has passed. Snowmobiling was his life's passion. He was Polaris all the way.
He loved snowmobiling and photography. It was was everything to Ed.
He was a funny, witty, sarcastic guy with a huge heart. He will be missed by many.
Please put him in your thoughts and prayers.
Members online
No members online now.
Latest profile posts
brand new here, can't figure out how to post in the forum - this will have to do.
My outside rear wheel assembly flew off today on my 850 Switchback XC. I found the assembly but not the flange screw. Never had this happen. 1 week for replacement to arrive at the dealer. Would you still ride, or no?
Edit: just figured out how to post!
My outside rear wheel assembly flew off today on my 850 Switchback XC. I found the assembly but not the flange screw. Never had this happen. 1 week for replacement to arrive at the dealer. Would you still ride, or no?
Edit: just figured out how to post!
I would like to add a USB to my 2019 Indy 600XC. The part number we purchased which was confirmed to fit my sled via the VIN number is #2412818. It's suppose to be able to connect to an existing connector on the sled. We tore the machine apart. We did not find any connectors that would fit this USB. Only available connectors in the 3 bags we found were small. This part has a connector 2" wide.