850Switchback's latest activity
-
8850Switchback replied to the thread '01 Polaris XC SP Edge 600 rear Fox Position Sensitive 2 shock.That sled didn't have float suspension, they used a Fox Position Sensitive shock in the the rear track shock. That Edge model uses the...
-
8850Switchback replied to the thread Check Engine Light.I don't think those older displays could show trouble codes like the newer ones can, you'd have to check in the owners manual. The link...
-
8850Switchback replied to the thread 2003 Classic Touring 700 Drive Axle - 1590366.Going to have to start calling around to all the salvage yards like Als in Newport VT
-
8850Switchback replied to the thread Heated grips.yep, cheap insurance
-
8850Switchback replied to the thread Heated grips.Newark has them for $6, NAPA wants 15.99 each https://www.newark.com/panasonic/cm1-r-12v/relay-automotive-spdt-14vdc-35a/dp/52F9219
-
8850Switchback replied to the thread Heated grips.Well Digikey changed the link, but they are currently out of stock. Some others have mentioned NAPA has a version too but I dont have...
-
8850Switchback replied to the thread Heated grips.The problem is the relays themselves are not sealed, chinese junk. Heres an older thread with links to a thread with the digi key parts...
-
8850Switchback replied to the thread Heated grips.They used the same relay everywhere in the sled, there should be 5 total if it has e-start.
-
8850Switchback replied to the thread Heated grips.Start by changing all the cheap junk chinese relays in the sled, if the load shed relay is going bad its possible theres weak current...
-
8850Switchback replied to the thread What's this module?.Looks like the relay for the starter.
-
8850Switchback replied to the thread Indy 500 hard start cold.Those are the vent lines for the carbs, I forgot they had that check valve in the older sleds. If that was plugged you likely weren't...
-
8850Switchback replied to the thread Indy 500 hard start cold.They can be a miserable PIA to prime if the tank is not full. The line exiting the tank is around 3/4 up to the tank so you have to pull...